×

Equipment List

Assembly

  • 5 – HAEGER HP6-C-4 HARDWARE INSERT PRESS – Hydraulic ram. Pneumatic auto feeder. Parts counter.
  • 1 – HAEGER 824 HARDWARE INSERT PRESS – 8 ton capacity. Pneumatic auto feeder. Parts counter.
  • 1 – TOG-L-LOC SHEET METAL JOINING PRESS
  • 2 – PHASE 2/ 2 TON ARBOR PRESS
  • 1 – FAMCO ARBOR PRESS
  • 2 – AIR FLOW FUME EXTRACTOR
  • 1 – PHASE II ARBOR PRESS

Finishing

  • 1 – NEW ENGLAND OVEN & FURNACE 3 BAY BATCH CURING OVEN – 12 by 15 feet. Electric fired. Time and temperature curing cycle. Solid state temperature control.
  • 2 – NEW ENGLAND OVEN & FURNACE SINGLE BAY ELECTRIC OVEN – 7 by 10 feet.
  • 1 – GRIEVE B2-650 BATCH CURING OVEN – 6 by 9 foot. Gas fired. 400,000 BTU input. Time and temperature curing cycle with recording monitor.
  • 1 – GRIEVE U8-550 CURING OVEN – 4 by 4 foot. Gas fired. 200,000 BTU input. Time and temperature curing cycle.
  • 1 – BINKS DYNAPRECIPITOR PAINT BOOTH – 17 feet by 25 feet.
  • 2 – NORDSON ECNO-COAT POWDER SPRAY BOOTH – Cartridge filtrated exhaust.
  • 1 – VOLSTATIC / GEMA MODEL PGC1 MANUAL POWDER SPRAY CONTROLLER AND GUN
  • 3 – MICROJUST 2000 SCREEN-PRINTING TABLE – Manually adjustable. Back-lit table.
  • 1 – TECA TPX-500 PAD-PRINTING MACHINE – Micrometer adjustable, 6 by 12 inch table travel.
  • 2 – ATMA AT-600H/E SCREEN-PRINTING MACHINE – Manual, semi-automatic or fully automatic, 3 axis.
  • 1 – DOUTHITT EXPOSURE UNIT – 36 inch by 44 inch silkscreen exposure unit with “Magic 83” light control integrator.
  • 1 – TECA-PRINT TS 35/50 EXPOSURE UNIT – 12 inch by 24 inch pad printing plate exposure unit with intregal dryer.
  • 1 – UMAX MIRAGE 2 DIGITAL FLATBED SCANNER – 11 inch by 17 inch capacity. 9600 DPI resolution.
  • DIRECT COLOR SYSTEMS – Direct Jet, 1024 UV printer.
  • WATER TREATMENT – Waste Treatment System for dip room. Recycled water

Inspection

  • 1 – ZEISS CONTURA UNIVERSAL 3D CMM (coordinate measuring machine) – with active scanning. Bridge type CMM with stationary table and lateral bridge drive. Maximum measuring range: X axis = 27.50, Y axis = 39.30, Z axis = 23.60.
  • 1 – ZEISS SCANMAX ARTICULATING ARM, 3D CMM (coordinate measuring machine) – Maximum probe travel range: X axis = 33.50, Y axis = 15.70, Z axis = 18.50.
  • 1 – METALSOFT FABRIVISION NON-CONTACT FLAT PART SCANNER – Provides measuring and digitizing capabilities for flat part dimensional inspection, as well as reverse engineering.
  • 1 – STARRETT MODEL HB350 OPTICAL COMPARATOR – with digital readout.
  • 2 – MITUTOYO DIGIMATIC HEIGHT GAUGE – 18 inch capacity.
  • 1 – MITUTOYO DIGITAL CALIPER – 40 inch capacity.
  • 2 – STARRETT DIGITAL CALIPER – 24 inch capacity.
  • 1 – ZEISS SURFCOM130A – Compact surface texture measuring instrument.

Machining

  • 4 – MIKRON HEM800, 3-AXIS, CNC MACHINING CENTER – 30 tool capacity. 14,000 RPM.
  • 3 – MIKRON HSM400LP, 3-AXIS, CNC MACHINING CENTER – 308 tool capacity. 42,000 RPM. 7 pallets (12” square)
  • 4 – MIKRON HSM800, 3-AXIS, CNC MACHINING CENTER – 60 tool capacity. 36,000 RPM. 4 pallets (30” x 15” rectangular)
  • 1 – HARDINGE GX250, 5-AXIS CNC MACHINING CENTER – 30 tool capacity. 20,000 RPM.
  • 2 – MIKRON HSM600U, 5-AXIS CNC MACHINING CENTER – 220 tool capacity. 36,000 RPM. 14 pallets (6” and 8” diameter)
  • 2 – MIKRON HSM600U, 5-AXIS CNC MACHINING CENTER – 170 tool capacity. 36,000 RPM. 6 pallets (350mm square)
  • 1 – METHODS SLANT JR. CNC LATHE W/ LNS HYDROBAR FEED – 10 tool stations, 5 ID, 5 OD, 1 5/8 dia. Through.
  • 1 – HARDINGE HLV-H SUPER PRECISION TOOL ROOM LATHE – Equipped with Accurite digital read-out.
  • 1 – HARDINGE DSM-59, SECOND OPERATION LATHE – 6 station turret. Variable speed.
  • 1 – PROTOTRAK, 3 AXIS CNC MILLING CENTER – with conversational programming.
  • 4 – SHARP UNIVERSAL MILLING MACHINE – 3 horsepower, variable speed. (2 equipped with Sony Millman digital read-outs.)
  • 1 – HARIG 612 SURFACE GRINDER – Manual feed. 6 by 18 inch table travel.
  • 1 – HARIG SURFACE GRINDER – Hydraulic, auto feed. 6 by 18 inch table travel. Flood coolant.
  • 1 – VICTOR DCM-5 VERTICAL BAND SAW – Blade welder attachment. 20 inch throat. 11 inches high.
  • 1 – AMADA HA-250 HORIZONTAL BAND SAW – Digitally controlled, automatic feed. 10 inch capacity.
  • 1 – K.H. HUMPERT HEAT TREATING OVEN – 10 by 11 by 18 inch capacity. Tempstar programmable temperature and process control.
  • 1- FREEMAN SCHWABE HYDRAULIC CLICKER PRESS MODEL FS-25

Sheet Metal Fabrication

  • 1 – AMADA EM2510NT SERVO-ELECTRIC TURRET PUNCH PRESS – 20 Metric Ton Capacity, 45 Station w/4 auto index stations. Maximum sheet size 50” x 100” (without reposition).
  • 1 – AMADA EMK3610NT SERVO-ELECTRIC TURRET PUNCH PRESS – 33 Metric Ton Capacity, 58 Station w/4 auto index stations. Maximum sheet size 60” x 100” (without reposition).
  • 1 – AMADA FBD8025NT AMNC-PC CONTROLLED HYDRAULIC PRESS BRAKE – 88 Ton Capacity. Maximum length, 8 feet.
  • 4 – AMADA FBD5020NT AMNC-PC CONTROLLED HYDRAULIC PRESS BRAKE – 55 ton capacity. Maximum length, 6 feet.
  • 1 – AMADA SL-6023 MULTIROLL AUTO FEED PANEL STRAIGHTENER – .09 Thick capacity, 24 inches wide.
  • 1 – MITSUBISHI 1212HV Co2 LASER – 2000 watt power supply. CNC controlled. 48” X 48” work area. 9” of travel in the “Z” axis.
  • 2 – TIMESAVERS 137-2HD WET BELT SANDER – 36 inch wide with dryer. Variable speed and brushlon attachment.
  • 1 – AMADA M-1260 SQUARING SHEAR – Hydraulic shear with .25” thick mild steel capacity. Front and rear NC controlled gauges and support.
  • 1 – AMADA CS-220 POWER NOTCHER – Maximum capacity- 1/8 inch thick steel.

Welding

  • 2 – MILLER AEROWAVE TIG WELDING MACHINE – 350 AMP AC/DC, 3 phase
  • 1 – SCIAKY PMC02ST SPOTWELDER – 100 KVA, 3 phase, with Interlock solid state controller.
  • 2 – MILLER LMSW-52T SPOTWELDER – 2.5 KVA, mobile with timer.
  • 1-DOWN DRAFT BOOTH & BELT SANDER

HAVE A PROJECT IN MIND?

CONTACT US to get started